![]() If you are using CW keying, using windows, you need to check and maybe, a little fix for everything to work correctly. When you are up and running, let me know. This is used to provide a clear and detailed description of the system, and is an important tool for affirming that the system meets the needs of all stakeholders. I use mac, but fldigi and flrig are the same. A system requirements document (SRD) is a record that outlines the functional and non-functional requirements required for a system. Only the CW keying must be set on fldigi as in the following photo:ĭon't pay attention to the different graphics. ATTENTION: Everything must be set on flrig for the conversation with the radio. It is sufficient that the same setting is on the radio and on FLdigi. However, the configuration is very simple: CAT via USB Baudrate: 38400 DTR or RTS for usb keying of your choice (I use DTR). I'll give you two screenshots of the 101. If you also need to know how to set up the radio, just let me know. Here are the settings for FLRig and FLDigi: This takes care of acting as a link between any radio (including 101) and fldigi. I was having similar concerns in the past, and with his settings everything works FB. I encourage you to email him direct and he will send you images of what settings he has on the radio as well as his computer. On Tue, at 07:17 PM, Joe KI5O wrote: Very good. He was right, no problems after the fan was installed to run RTTY. Then I got a call from Drake repairman, saying if we install a factory fan in the rig, none of this would be happening. Then every few months the rig had to sent to the shops for repair due to blown resistors. Every thing seem to be setup right and it worked flawless. Reminds me back in 1983 when I had a new Drake TR5 setup for Kantronics RTTY. So, I stopped experimenting with HRD and now on Fldigi. When I tried to installed HRD (30 day trial) and press tune it would shut down the whole rig, Found out later the connection cable picks up too much RF and shuts it down. Installing Fldigi What are the minimum hardware requirements for fldigi It is recommended that a process of at least a 1.2 GHz for most digital modes, and at least a 1.6 GHz processor for CPU-intensive modes like DominoEX and Thor. I really don't want to experiment on setup using a new rig on unproven setup procedure for digital. The advertisements for the 101D sounded like the rig was easy to setup for digital than most on the market, LOL. According to the results of the Google Safe Browsing check, the developers site is safe. The following versions: 4.1, 4.0 and 3.2 are the most frequently downloaded ones by the program users. that slotcar digital decoders require both hardware design and firmware coding. This free software was originally designed by David Freese. Flrig is needed for interfacing with FLdigi for transceiver control. I will work on the settings he has given in the next couple of days. Fldigi.exe is the default file name to indicate the Fldigi installer. ![]() He does answer a few of the question I have on setup. (69/17=4.Thanks, just found it, It looks like there are a lot of hams having the same problems in setup, too. Each transmission cycle can pack up to 69 character bits. ![]() In JS8Call, PARIS is encoded into 17 bits (3.4 bits/character).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |